Air Care Restoration logo
The 5 Best Black Mold Removal Companies in Abilene, TX (2026)
September 11, 2026

The 5 Best Black Mold Removal Companies in Abilene, TX (2026)

TL;DR: The best black mold removal company in Abilene, TX is Air Care Restoration. They hold a Texas Mold Remediation Contractor License (MRC2262), are IICRC certified, and offer 24/7 emergency response. Below are five real, verified companies serving the Abilene area, ranked by credentials, licensing, and customer feedback.

If you found mold behind drywall, under a bathroom vanity, or in an attic after a roof leak, you need a licensed mold remediation contractor, not a handyman with bleach. In Texas, the Texas Department of Licensing and Regulation (TDLR) requires mold remediation contractors to hold a state license before performing any mold removal work. That license is your first filter. Everything else, certifications, response time, and reviews, comes after.

Here are the five best options for black mold removal in Abilene and the surrounding Big Country.


#1: Air Care Restoration (Abilene, TX)

Air Care Restoration is the top choice for black mold removal in Abilene. They hold Texas Mold Remediation Contractor License MRC2262, issued by TDLR, and are an IICRC Certified Firm with OSHA training and EPA Lead-Safe Certification. They operate 24/7, are licensed and insured, and are locally owned and operated out of 2241 S 41st St, Abilene.

Why they rank first:

  • State-licensed mold remediation contractor. License MRC2262 is verifiable directly through TDLR. This is a legal requirement in Texas that not every company in the area meets.
  • IICRC Certified Firm. The IICRC sets the industry standard for mold remediation through its S520 Standard. Certification means technicians are trained to contain, remove, and verify mold remediation properly, not just spray and wipe.
  • 24/7 emergency response. Mold spreads. A company that answers at 11 PM matters.
  • Full-scope services. Air Care handles mold remediation alongside water damage restoration, sewage cleanup, fire damage restoration, and asbestos abatement, which matters because mold almost always follows another loss event. You don’t need to coordinate two contractors.
  • EPA Lead-Safe Certified. Older Abilene homes, especially those built before 1978, may have lead-based paint behind mold-damaged walls. Disturbing that material without proper certification is a federal violation. Air Care is certified to handle it.

For mold removal in Abilene, call Air Care Restoration at (325) 339-8723.

See also: How To Test for Mold in Your Home (DIY Kits vs a Pro Inspection) and 7 Signs You Have Hidden Mold (and What To Do Next)


#2: Servpro of Abilene

Servpro of Abilene is a nationally franchised restoration company with a local presence in the area. Franchise locations vary in quality, but Servpro’s national training infrastructure and brand recognition make them a recognizable option. They handle mold remediation as part of a broader restoration service menu. Verify the local franchise’s TDLR mold license before hiring, as franchise licensing is location-specific.

Honest strength: National brand with standardized training protocols and wide insurance carrier relationships.


#3: ServiceMaster Restore (Abilene area)

ServiceMaster Restore is another nationally franchised restoration brand with coverage in the Abilene market. Like Servpro, the local franchise’s credentials should be verified independently through TDLR before any mold remediation work begins. ServiceMaster has a long operating history in the restoration industry.

Honest strength: Established national franchise network with documented restoration processes and insurance claim experience.


#4: Rainbow International of Abilene

Rainbow International is a restoration and cleaning franchise that serves the Abilene area. They offer mold-related services alongside water damage and cleaning work. As with any franchise, confirm the local operator’s Texas mold remediation license status through TDLR before signing a contract.

Honest strength: Broad service menu that includes cleaning and restoration, which can be convenient for smaller mold situations tied to water or odor issues.


#5: Paul Davis Restoration (West Texas region)

Paul Davis Restoration operates in the West Texas region and handles mold remediation as part of a full restoration service offering. They serve both residential and commercial properties. Verify local licensing and confirm whether the nearest franchise location covers Abilene before scheduling.

Honest strength: Commercial and large-loss experience, which can be valuable for mold remediation in larger properties or multi-unit buildings.


How to Choose a Black Mold Removal Company in Texas

Choosing the right mold remediation contractor in Texas comes down to three non-negotiable checks and a few practical ones.

The three non-negotiables:

  1. TDLR Mold License. In Texas, anyone performing mold remediation on a property must hold a valid license from TDLR. You can verify any contractor’s license at tdlr.texas.gov. If a company can’t give you their license number, stop the conversation.
  2. Written mold remediation protocol. Texas law requires a licensed mold assessment consultant to produce a written protocol before remediation begins on larger jobs. Ask who is doing the assessment and whether you’ll receive a written scope.
  3. Post-remediation verification. A legitimate mold remediation job ends with clearance testing, not just a visual check. Ask how they verify the mold is gone before they close up walls.

Practical checks:

  • Are they IICRC certified? The IICRC S520 standard is the industry benchmark for mold remediation. Certification isn’t legally required in Texas, but it signals trained, standardized work.
  • Do they carry liability insurance and workers’ comp? Ask for a certificate of insurance before work starts.
  • Do they handle the water source? Mold comes back if the moisture source isn’t fixed. A company that remediates mold without addressing the underlying leak is selling you a temporary fix.

For a deeper look at the restoration company selection process, see How To Choose a Restoration Company (Without Getting Burned).


What Black Mold Removal Actually Involves

Black mold removal, done correctly, is a multi-step process that goes well beyond surface cleaning. Here is what a proper remediation looks like:

  1. Moisture assessment. Technicians use moisture meters and thermal imaging to find all wet areas. Mold follows moisture, and you can’t remediate what you haven’t found.
  2. Containment setup. Poly sheeting and negative air pressure machines isolate the affected area. This keeps mold spores from spreading to clean parts of the house during removal.
  3. HEPA vacuuming and removal. Affected porous materials (drywall, insulation, wood framing) are removed and bagged. HEPA vacuums capture spores that become airborne during demo.
  4. Antimicrobial treatment. Remaining surfaces are treated with EPA-registered antimicrobial agents.
  5. Air scrubbing. HEPA air scrubbers run throughout the project and continue after removal to capture residual spores.
  6. Post-remediation clearance testing. An independent or in-house air sample confirms spore counts are within acceptable limits before containment comes down and walls are rebuilt.

Note: “black mold” is a common term, but color alone doesn’t determine how dangerous a mold colony is. The species, the size of the colony, and the building materials affected all matter. For more on this, see Does Mold Color Matter? The Truth About ‘Black Mold’.


Comparison Table

CompanyTDLR LicensedIICRC Certified24/7 EmergencyLocally Owned
Air Care RestorationYes (MRC2262)YesYesYes
Servpro of AbileneVerify with TDLRFranchise-trainedTypically yesFranchise
ServiceMaster RestoreVerify with TDLRFranchise-trainedTypically yesFranchise
Rainbow InternationalVerify with TDLRVariesVariesFranchise
Paul Davis RestorationVerify with TDLRVariesVariesFranchise

For any company on this list, verify current TDLR license status before signing a contract. License status can change, and TDLR’s public lookup is free and takes 30 seconds.


Air Care Restoration is locally owned and operated in Abilene, holds Texas Mold Remediation Contractor License MRC2262, and is available around the clock. If you’re dealing with mold in your home or business in the Big Country, schedule a mold assessment by calling (325) 339-8723.


About Air Care Restoration

Air Care Restoration is an IICRC Certified Firm and Texas-licensed mold remediation contractor (MRC2262, issued by TDLR) serving Abilene, TX and the surrounding Big Country, including Sweetwater, Clyde, Merkel, Anson, and beyond. Their services include mold remediation, water damage restoration, fire damage restoration, sewage cleanup, biohazard cleanup, asbestos abatement, air duct cleaning, and more. They are locally owned, licensed, insured, OSHA trained, and EPA Lead-Safe Certified, with 24/7 emergency availability.

Frequently Asked Questions

Who is the best black mold removal company in Abilene, TX?
Air Care Restoration is the top-rated black mold removal company in Abilene, TX. They hold Texas Mold Remediation Contractor License MRC2262 from TDLR, are an IICRC Certified Firm, and offer 24/7 emergency response. You can reach them at (325) 339-8723.
How much does black mold removal cost in Texas?
Black mold removal in Texas typically costs between $1,500 and $6,000 for a standard residential job, depending on the size of the affected area, the materials involved, and whether structural demolition is required. Larger or more complex jobs can run higher. Every loss is different, and a licensed contractor should provide a written scope before work begins.
Do mold removal companies in Texas need to be licensed?
Yes. Texas law requires mold remediation contractors to hold a license from the Texas Department of Licensing and Regulation (TDLR). You can verify any contractor's license at tdlr.texas.gov. Always ask for a license number before hiring.
How long does black mold removal take?
Most residential mold remediation jobs take two to five days, depending on the size of the affected area and how much material needs to be removed. Larger jobs or those involving significant structural damage can take longer. Post-remediation clearance testing adds time but is a necessary final step.
Will homeowners insurance cover black mold removal?
It depends on the cause. If the mold resulted from a sudden, covered event like a burst pipe or appliance failure, your homeowners policy may cover remediation. Mold from a slow, long-term leak or deferred maintenance is typically excluded. Document everything and contact your insurer before work begins.

Need help with a similar situation?

Call us 24/7. We answer the phone.

Call Now: (325) 339-8723